VK-type liquid-packed ring compressors Rambler's Top100

The compressors are designed for compression or transportation of air or inert gases insoluble in water as well as aggressive gases not producing corroding effect on the compressor flowing part materials. The compressors can be used for transportation of dust-laden gases with content of solid particles of no more than 0.1mm size and little water content for food, chemical, metallurgical and other branches of industry.
The compressors can be equipped with any electric motor of power and rotational speed corresponding to documentation requirements.

Design features:

Rotary, horizontal, liquid-packed ring, single-stage, with axial suction and discharge.
They are of a simple design. The rubbing parts in the working space are not available. The antifriction bearings serve as supports. The shaft sealing is soft gland packing.
The flowing part for compressors VK-50M1, VK-100/1.0 and VK-150/1.2 is made of cast iron and carbon steels, for compressors VK-50N and VK-150/1.2N - of corrosion-proof steels, for VK-50T - of titanium alloy.

Specifications

Compressor
type		 Capacity,
reduced
to initial
conditions,
m3/sec		 Pressure,
MPa		 Water
consump-
tion,
l/sec		 Consumed
power,
kW		 Shaft
rotational
speed,
RPM
inlet outlet
VÊ-25/1,5 0,417 0,1013 0,15 0,75 45 750
VÊ-50Ì1 0,875 0,1013 0,15 1,225 92 600
VÊ-50Í 0,833 0,1013 0,15 1,17 80 600
VÊ-50Ò 0,833 0,1013 0,15 1,17 80 600
VÊ-60/1,0 1,0 0,1013 0,2 2,0 132 600
VÊ-100/1,0 1,66 0,1013 0,2 4,2 220 500
VÊ-150/1,2N 2,5 0,1013 0,22 4,667 450 600
VÊ-150/1,2 2,5 0,1013 0,22 4,667 450 600
VÊ-150/1,2NÌ 2,5 0,1013 0,22 4,667 450 600

Note::   M - modernized.

Go to the list.

Rambler's Top100