Code

Price, USD

20CB1

–100 to +300^oC); steam- and water-resistant; resist attack by

oils, alcohol (spirits), fats, acids, alkalis.

Gaskets of various types, pipes, hoses, plates, belts. Technical

characteristics – on the instructions of customers.

upon receipt of the inquiry

20X1

Production rate – 120 packets per min. It is designed for packing cigarettes of an oval type into packets.

72000

20CD1

Production rate – from 100 to 3000 dal per 24 h.

Technical characteristics here.

The price of the plant complex (production rate – up to 6000 alcohol (spirit) per 24 h) is calculated individually.

are indicated  here.

20СD2

Production rate – from 100 to 2000 dal per 24 h.

Technical characteristics here.

Manufacture of complete plants (production rate – up to 6000 dal per 24 h) is possible.

upon receipt of the inquiry

20BJ1

Technical characteristics here.

upon receipt of the inquiry

FGP type filtering centrifuges are horizontal machines with reciprocating-pusher discharge of sediment, designed for mechanical separation of suspensions with large and medium crystal solid phase, rapidly losing their yield strength with solid phase content more than 50%.
        Owing to compactness, simplicity of maintenance, production process continuity, possibility of sediment washing, high productivity, these types centrifuges found wide usage in chemical, metallurgical, ore mining, sugar and other branches of industry.

Technical characteristics here.

FGN type automatic filtering centrifuges are horizontal batch sediment knife-discharge machines, designed for separation of suspensions with a medium and fine grained (particles size more than 30µm) soluble solid phase at its volume concentration more than 10%.
This type centrifuges provide high quality of a solid phase washing. Due to this fact they are widely used, when producing sodium sulphate, anthracene, iron and nickel vitriol, boric acid, soda, sodium chloride, starch and in other production processes of the chemical industry and contiguous to its branches.
OGN type automatic settling centrifuges are batch horizontal sediment knife-discharge machines, primarily designed for separation of hardly filtering suspensions with an unsoluble solid phase (particles size more than 5µm ). Sediment washing is not specified in these centrifuges.

Technical characteristics here.

20BJ19

        Electrolysis is one of the main stages in technological process of aluminium production.
        The company manufactures anodic devices for its realization.

• beam-collector;
• anodes lifting mechanism;
• anodic install buses;
• anodes holders.

Two mechanisms for lifting and lowering of install buses with fixed anodes and two systems of automatic point alumina supply are mounted on the beam.
        Automatic alumina supply system incorporates the bunker with in pairs fixed inside punches and a batcher. The electrolyte crust is perforated by the punch, after that the alumina portion for electrolysis process keeping is supplied through the batch.
        Anodic install buses consist of aluminium buses and flexible aluminium tappings by which the current is supplied to the install buses. All contacts between install buses component are welded. Aluminium bars of anodes are pressed by the special clamps to anodic install buses performing electrical contact.
        Each anode consists of graphite unit and anode holder, steel nippels of ahich are fixed in the nippel seats of unit by cast iron pouring.
        The anode holder consists of the aluminium bar and the steel hanger. The contact between them is performed by welded bimetallic plate.

Specifications of the anodic device

upon receipt of the inquiry

20BJ20

Average diameter of fibre – not more than 2-3 micrometres.

Density – 20-30 kg/m³.

Moisture content – not more than 2 %.

Thermal conductivity (t^o – 25^oC) – not more than 0.038-0.040 W/mK.

Application temperature – from -260 to + 700^oC.

upon receipt of the inquiry

20BJ21

Maximum width – not more than 240 mm.

Maximum length – 6.5 m.

Minimum length – 4.0 m.

Maximum linear weight – 9 kg/m.

Average linear weight – 1.8 kg/m.

Minimum linear weight – 0.3 kg/m.

Minimum wall thickness – not more than 1 mm.

upon receipt of the inquiry

20BJ23

It is designed for reclamation from hog (pig)-raising farm (total number of livestock – 3000 hogs). Organic fertilizer and biogas production.

A list of the components will be presented upon receipt of the inquiry.

upon receipt of the inquiry

20BJ9

Centrifugal spraying machine (atomizer).

It is designed for thin atomization of materials (solutions, emulsions, suspensions) capable of flowing in the liquid state in drying chambers of spray driers (upper and lower feed of heat-transfer medium with t^o – up to 830 ^oK (600 ^oC)). Disk rotational speed – 8000 or 10000 revolutions per min.

Technical characteristics here.

upon receipt of the inquiry

Absorption column consists of six sections, each of which acts specific functions. If any sections fails, it can be replaced individually. Heat exchanger is used for distillation of carbonic acid from liquid that is in a distilling condenser with the help of steam-gas mixture.

Technical characteristics here.

upon receipt of the inquiry

20BJ13

They are used for receipt, storage, processing and distribution of products in chemical, oil-chemical, food and other industries

(working pressure – up to 25 MPa (250 kgs/cm²); temperature – from –210^o C to + 700^o C; volume – up to 1000 m³).

Apparatuses-reservoirs without internal arrangement.

Apparatuses-reservoirs with mixing equipment.

Special apparatuses-reservoirs (including functional purpose):

absorbers; extractors; stills;

desorbers; catalytic reactors; oxidizers;

washers; combustion chambers; reactors;

regenerators; mixers; separators;

neutralizers (for finish chlorinators.

neutralization);

Apparatus are developed on the individual design; they can be manufactured of carbon and corrosion-resistant steel, titanium alloys on the base of nickel (nickel-molybdenum alloy – C).

upon receipt of the inquiry

20BJ11

There is a high dividing capacity under great steam-and-liquid pressure. Small losses of pressure. Easiness of mounting and dismounting.

Technical characteristics here.

upon receipt of the inquiry